This is the electric powered, radio controlled, 1/10 scale, ready to run SC10 Short Course Race Truck with the Pro Comp Body Trim from Associated. FEATURES: Chassis: Molded composite low CG design with side nerf bars, hinged battery hold down strap fits NiMH and LiPo battery packs Drive: Rear wheel with steel rear dogbone drive shafts Motor: Associated Reedy Radon 17 turn Radio: Associated XP2 2-channel pistol grip with metal gear steering servo, transmitter does not have charge jack ESC: Associated XP SC200 forward/reverse with LiPo low voltage cut- off and reverse lockout Shocks: Oil-filled with blue aluminum bodies Body: 0.040" (1mm) thick painted and trimmed with Pro Comp scheme Differential: Sealed, planetary gear Spur Gear: 87 tooth for brushed and modified motors Slipper Clutch: Dual sided, externally adjustable Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black in color Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm) diameter, 1.7" (43mm) wide Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Bumpers: Front and rear with functional rear rubber mud flaps Ball Bearings: 14 rubber sealed Suspension: Fully adjustable with steel turnbuckles Steering: Angled bellcrank "coplanar" steering with integral servo saver INCLUDES: SC10 Short Course Race Truck Kit from Associated with tires, wheels, painted body, motor, two spur gears, radio and instruction manual REQUIRES: Battery: 6-7 cell NiMH stick pack or 2-3 cell LiPo pack Battery Charger: Peak detection type recommended Transmitter Batteries: Eight AA-size Building and track equipment SPECS: Vehicle- Length: 21.6" (550mm) Width: 11.5" (293mm) Track: 9.6" (245mm) Weight: 4.6lbs (2080g) Wheelbase: 12.9" (327mm) Internal Gear Ratio: 2.6:1 Body- Length 21.6" (550mm) Width 11.5" (293mm) at front fenders, widest point 8.8" (224mm) at center section, narrowest point Height: 6" (153mm) |
|
Hummer H1 |
Hummer H2 |
Hummer H3 |
Hummer SUT |
Toyota FJ Cruiser STALLION CUSTOMS, LLC
Retail Store Hours
Stallion Customs is here to serve your vehicle accessory needs.
We are committed to providing you the finest accessories for your vehicle WITH
the best possible customer service. We pride ourselves on ding the right
thing for the right reasons. Our accessory shipping department has been
tasked with filling all orders on the day that they are received! This can be a
tall task when you think of the number of part numbers we have at any one time,
but our shipping department is definitely up to the task. We offer
accessories and parts for many vehicle, including, but not limited to the Hummer H1,
H2, H3, SUT the Escalade, Viper, Dodge Ram Trucks, Chevy Silverado Series
Trucks, Ford F-Series Trucks, Chevy Tahoe, GMC Yukon & Denali, Toyota FJ
Cruiser, Tundra & Sienna and many other exciting vehicles. Please remember
that all of these vehicles are trademarked and are only used for identification
purposes. We are a proud member of the Specialty Equipment Market
Association (SEMA). All orders can be taken 24/7 via our secure site provided by Yahoo Stores. "HUMMER", "H2", "H3", "H3T", "SUT", "GM", are registered trademarks of General Motors and are used for identification purposes only. Stallion Customs and it's products entities and personnel are in no way affiliated with General Motors or its products. |